2 universe, real-time DMX recorder. stand-alone DMX replay unit.
The XRC-200 is an easy to use DXM recording and replay unit. The operating concept is similar to a CD player and can be used by non-professionals. The sequences are recorded from a lighting console, or other DMX output device, onto the XRC-200. The XRC-200 replays the recorded sequences in real time. With the ability to record 2 DMX universes (1024 DMX channels), the XRC-200 is suitable for LED and moving light applications/installations. A variety of applications in architecture and entertainment, tradeshow, retail and museum lighting are covered with the XRC-200 easily and economically. The optional XRC-CT15B contact box with 15 inputs for dry contacts allows a customized integration of triggers for control of the XRC-200. In addition, the XRC-200 has an internal timer for show and device control. The device can also be set up to be remotely operated or triggered by DMX. During live shows, the XRC-200 can be used as a DMX backup device. The sequences and settings of the XRC-200 can be stored and managed with the XRC-200 PC software, which is connected via the USB port.
- Record and play back 64 Sequences
- 10 Configurable play lists
- Configurable fade times
- Optional 15 control inputs
- 2 DMX Inputs
- 2 DMX Outputs
- Built in timer
- Backup device
- USB connection for firmware update, and PC software
- PC software for uploading, downloading and storage of shows
RECORD DMX - The XRC-200 is connectet between the light equipment and the light controller to record the DMX in real time.
REPLAY DMX - The XRC-200 plays the recorded sequences precisely. It starts manualy or automaticaly. It can also start by using the internal timer.
IGNITION SEQUENCE - Initializing commands like lamp-on or reset can be recorded on a special ignition sequence. This ignition sequence runs once at each start-up of the XRC-200.
PLAYLIST - Multiple sequences and interactivity functions can be combined into playlist. It's possible to create up to 10 playlists.
BACKUP MODE - The XRC-200 can be used as backup device. It will automatically take over when the DMX signal fails.
For more information, check out Swisson's website.