Martin RUSH MH 4 Beam

$1,895.00
Write a Review
SKU:
MH 4 Beam
Martin RUSH MH 4 Beam

This compact beam moving head for smaller venues blasts an intense and narrow beam for spectacular mid-air looks and effects. It houses a fixed gobo wheel and color wheel with a multitude of effects possible from a dimmer and strobe, 6-facet prism and focus.

Features

  • Powerful beam moving head
  • Sharp, narrow long-throw beam
  • Powerful mid-air effects
  • Fixed gobo wheel
  • Color wheel
  • Mechanical dimming and strobe
  • 6-facet prism
  • Motorized focus
  • 3 & 5 pin XLR

Specifications

Physical

  • Length: 12.6 in.
  • Width: 10.1 in.
  • Height: 19.0 in.
  • Weight: 30.9 lbs.
Dynamic Effects
  • Color wheel: 14 colors plus open, continuous and stepped scrolling, rotation with variable direction and speed
  • Static gobo wheel: 17 gobos plus open, continuous and stepped scrolling, rotation with variable direction and speed
  • Shutter: Strobe effect, pulse effects, instant open and blackout
  • Prism: 6-facet, indexing and rotation with variable direction and speed
  • Focus: Motorized
  • Dimmer: 0 - 100% continuous dimming
  • Pan: 540°
  • Tilt: 270°
Control and Programming
  • Control system: DMX
  • DMX channels: 13
  • Setting and addressing: Control panel with LCD display
  • DMX compliance: USITT DMX512/1990
  • 16-bit control: Dimming, pan and tilt
  • Pan and tilt speed: Adjustable via onboard control panel and DMX
  • Position correction system: Available for pan and tilt
Lamp
  • Osram HRI 132 W lamp models
  • Approved lamp: Osram Sirius HRI 132 W
  • Color temperature: 8800 K
  • CRI (Color rendering index): 62
  • Average lifetime: 6000 hours*
  • *Manufacturer's figure
Optics
  • Beam angle: 
Construction
  • Color: Black
  • Housing: High-impact flame-retardant thermoplastic
  • Protection rating: IP20
Installation
  • Minimum distance to illuminated surfaces: 6.5 m (21 ft. 4 in.)
  • Mounting points: Two quarter-turn brackets for rigging clamps
  • Location: Indoor use only, must be fastened to surface or structure
  • Orientation: Any
Connections
  • AC power input: Neutrik PowerCon
  • DMX data in/out: 3-pin and 5-pin locking XLR

Electrical

  • AC power: 100-240 V nominal, 50/60 Hz
  • Typical total power consumption: 234 W

     Power consumption figures are typical, not maximum. Allow for +/-10% variation.

Typical Power and Current
  • 110 V, 60 Hz: 2.2 A, 234 W, PF 0.996
  • 230 V, 50 Hz: 1.1 A, 231 W, PF 0.996
     Measurements made at nominal voltage. Allow for a deviation of +/- 10%.
 
Thermal
  • Cooling: Forced air (temperature-regulated, low noise)
  • Maximum ambient temperature (Ta max.): 40° C (104° F)
  • Minimum ambient temperature (Ta min.): 0° C (32° F)
  • Total heat dissipation (calculated, +/- 10%): 800 BTU/hr.

 

Click here for your needed accessories:

Clamps  blacksafetycable-12.jpg

 

For more information, check out Martin's website.