Martin JEM ZR25

Write a Review

The JEM ZR25 is a small, yet powerful fog machine designed to deliver superior and uninterrupted performance in demanding professional applications. Via its 1,150 W heat exchanger, the JEM ZR25 produces large amounts of fog ideal for small to medium-sized venues and stages in both install and rental markets.  The JEM ZR25 features variable output control for more subtle effects and is fully up-to-date with digital remote, DMX and RDM.   The entire JEM ZR range is compatible with a wide range of JEM Pro fog fluids. As machines designed and built to last, the JEM ZRs will continue to perform with great output and low  consumption.


  • 1,150 W heat exchanger
  • 40 ml in 30 seconds peak performance
  • 600 m³/min fog output
  • Variable output control for subtle effects
  • 7-8 minute warm-up time
  • Digital remote, DMX and RDM
  • Compatible with a wide range of JEM Pro fog fluids
  • Floor standing or truss mounting (bracket included)
  • PowerCON TRUE1
  • 2.5-liter bottle



  • Length: 19.1 in.
  • Width: 13.2 in.
  • Height: 9.6 in.
  • Height with hanging bracket: 13.2 in.
  • Weight, dry: 24.7 lbs.
  • Weight, filled: 30.2 lbs.
  • Coverage volume: 600 m3 (21,189 ft3) per minute
  • Fluid consumption (max.): 100 ml per minute
  • Continuous effect output
  • Ready time: 7 minutes
 Control and Programming
  • Control options: Integrated digital remote control, DMX, optional analog remote control, master/slave link mode, PLC (0-10V)
  • Control parameters: Continuous or timer-controlled output
  • Fog: Variable output control, 0-100%DMX channels: 1External fluid control: Fluid sensing
  • DMX compliance: ANSI E1.11 - USITT DMX512-ARDM compliance: ANSI/ESTA E1.20 RDM
  • Housing: Steel and aluminum
  • Hanging bracket: Integrated yoke with safety attachment point
  • Color: Black
  • Heat exchanger: 1150 W, thermally protected
  • Fluid pump: Oscillating piston, high pressure
  • Fluid management: Fluid out sensing, sealed for transportation
  • Fluid reservoir: 2.5 l drop-in reservoir with quick-connect fitting
  • External fluid control: Fluid sensing
  • Remote control: Integrated digital remote with 3 m cable, 3-pin XLR connector
  • Mounting: Standing or hanging
  • Orientation: Up to +/-40° from horizontal
  • Clearance around machine: 100 mm (4 in.)
  • Connections
  • AC power: Neutrik PowerCON TRUE1
  • DMX and link mode in/out: 5-pin locking XLR
  • Remote control: 3-pin locking XLR
  • Firmware: AVR socket
  • US modelAC power: 100-130 V nominal, 50/60 Hz
  • Main fuse: 10 AT (slow blow), 125 V
  • Typical power and current: 1050 W, 8.8 A*
*Measurements made at nominal voltage. Allow for a deviation of +/- 10%.
  • Maximum ambient temperature (Ta max.): 104° F
  • Exterior surface temperature, steady state: 86° F
  • Max. nozzle temperature: 554° F
  • Minimum ambient temperature (Ta min.): 41° F
  • US safety: UL 998Canadian safety: CSA C.22.2 No. 104.01
Included Items
  • Fluid reservoir, 2.5 l
  • ZR Series Digital Remote Control
  • Power input cable, US, 10 A, PowerCON TRUE1, molded NEMA 5-15P, 3 m (9.8 ft.)
For more information, check out Martin's website.