Lightronics XC Series Portable Dimmers

$375.00
Write a Review

The XC40 is a four circuit compact dimmer with a load capacity of 600 Watts per circuit. Each circuit is protected by a 5 Amp fuse. It can be controlled in several ways - the most common being DMX-512. Other control modes are also provided for stand alone operations. These include individual channel control and chaser functions. Individual circuits may be operated as non-dim (relay) circuits. Individual circuits may be set for one of several response curves and may be limited to less than full intensity. In addition to full soft patch capability there is a quick pack address function which enables rapid setup.

The XC40-WSRX is provided with a wireless DMX receiver.

The XC42 is a four circuit compact portable dimmer with a load capacity of 1200 Watts per circuit. Each circuit is protected by a 10 Amp fuse. It can be controlled in several ways - the most common being DMX-512. Other control modes are also provided for stand alone operations. These include individual channel control and chaser functions. Individual circuits may be operated as non-dim (relay) circuits. Individual circuits may be set for one of several response curves and may be limited to less than full intensity. In addition to full soft patch capability there is a quick pack address function which enables rapid setup. 

The XC42-WSRX is provided with a wireless DMX receiver.

The XC62 is a six circuit compact portable dimmer with a load capacity of 1200 Watts per circuit. Each circuit is protected by a 10 Amp fuse. It can be controlled in several ways - the most common being DMX-512. Other control modes are also provided for stand alone operations. These include individual channel control and chaser functions. Individual circuits may be operated as non-dim (relay) circuits. Individual circuits may be set for one of several response curves and may be limited to less than full intensity. In addition to full soft patch capability there is a quick pack address function which enables rapid setup.

The XC62-WSRX can optionally be provided with a wireless DMX receiver.

XC40 Specifications

  • Optional Built In Wireless DMX
  • LED Digital Display
  • 4 Channels
  • 600W per Channel
  • Softpatch (each dimmer)
  • Dimmer Limiting
  • Dimmer Curve Selection
  • Architectural Interface
  • AMX/Crestron Interface
  • DMX-512 Protocol
  • 8 Built in Chases
  • Relay Mode Switchable
  • Fuses
  • Edison Outputs
  • 120V
  • For more information, check out the XC40 Cut Sheet

XC42 Specifications

  • Optional Built In Wireless DMX
  • LED Digital Display
  • 4 Channels
  • 1200W per Channel
  • Softpatch (each dimmer)
  • Dimmer Limiting
  • Dimmer Curve Selection
  • Architectural Interface AMX/Crestron Interface
  • DMX-512 Protocol
  • 8 Built in Chases
  • Relay Mode Switchable
  • Fuses
  • Edison Outputs
  • 120V
  • For more information, check out the XC42 Cut Sheet

XC62 Specifications

  • Optional Built In Wireless DMX
  • LED Digital Display
  • 6 Channels
  • 1200W per Channel
  • Softpatch (each dimmer)
  • Dimmer Limiting
  • Dimmer Curve Selection
  • Architectural Interface
  • AMX/Crestron Interface
  • DMX-512 Protocol
  • 8 Built in Chases
  • Relay Mode Switchable
  • Fuses
  • Edison Outputs
  • 120V
  • For more information, check out the XC62 Cut Sheet